Toilet repair in Mount Pleasant, TX that ends the running

Toilet repair is the professional fixing of a running, leaking, or weak-flushing toilet in a Mount Pleasant, TX home. A toilet that runs all night wastes water and keeps the household awake. NTP Plumbing repairs toilets across Mount Pleasant, TX — flappers, fill valves, wax rings and flush valves — and checks the shutoff and supply line while we are there. Open 24 hours, Monday through Sunday.

Plumber repairing a running toilet in a Mount Pleasant, TX bathroomRunning fixedFlush restoredNo more leaks
  • We test the flushThree cycles before we leave
  • We check the baseDry rag on every call
  • We explain the partYou see what failed
  • We clean the floorOld parts hauled away

What's included in a toilet repair call

Every toilet repair visit includes a full diagnosis, the repair itself, and a flush test before we leave. We tell you upfront if a part isn't in the truck or if the job needs something beyond a standard repair, like a flange replacement or a drain line clearing.

Plumber repairing a running toilet in a Mount Pleasant, TX bathroom
  • Full fixture inspection

    We check the fill valve, flapper, flush valve, tank bolts, supply line, shutoff valve, wax ring, and closet flange. That's the whole fixture, not just the part that's obviously broken.

  • Parts replacement

    Flappers, fill valves, wax rings, closet bolts, supply lines, and shutoff valves are standard stock. We use name-brand parts that fit your toilet.

  • Clog clearing

    If the toilet is backing up, we clear the trapway with a plunger or closet auger. If the clog is deeper, we run a drain snake into the branch line to clear it at the source.

  • Flush and leak test

    Three full flush cycles, a tank refill check, and a dry-rag test at the base and supply connection. We don't leave until the floor stays dry and the flush is strong.

  • Cleanup and haul-away

    We wipe down the fixture and floor, bag the old parts, and take them with us. Your bathroom looks the way it did before we started, minus the leak.

Homes and rentals

A running toilet and a rocking toilet are different repairs — one is tank parts, the other is the flange and the floor — but the checks at the end are the same in a home and a rental. What changes is the access, the schedule, and who needs the paperwork for a toilet repair job.

For homes and rentals

We handle running toilets, leaks at the base, and clogs in houses and rental units. We agree a visit time that works for the tenant and the owner.

  • Running toilet
  • Leak at the base
  • Clogged or backed up

For rentals and property managers

We repair toilets in rental homes and multi-unit properties. Property managers get a written summary of the work for the file.

  • Rental bathroom fixture repair
  • Multi-unit clogs
  • Written work summary

What toilet repair in Mount Pleasant, TX really involves

A plain-language look at what Toilet Repair involves and when it is needed. The City of Mount Pleasant charges a $75 residential plumbing permit fee where a permit is required (inside city limits) — that is a City fee, not our price.

See how it works

Most toilet repairs are small parts doing a big job badly. A flapper that no longer seals lets the tank drain into the bowl all day; a fill valve that will not shut off keeps the tank overfilling into the overflow tube; a wax ring that has dried out lets water seep at the base with every flush. Each one is diagnosable in minutes and usually fixed while we are there.

The jobs we see most in Mount Pleasant, TX are running toilets in older homes — Downtown houses and Southgate ranches where the internals are original — and rocking toilets where the flange or the floor has given a little. A toilet that rocks needs the flange checked, not just a new wax ring, or the leak comes back. Work follows the 2024 International Plumbing Code adopted by the city, and a toilet replacement is one of the few jobs the state exempts from the city permit requirement.

A running toilet is a small part failing loudly. Fix the part and the silence follows.

Plumber repairing a running toilet in a Mount Pleasant, TX bathroom
What it is
Replacing the failed flapper, fill valve, flush valve or wax ring inside or under a toilet.
When you need it
A toilet that runs, a weak flush, water at the base, or a bowl that rocks.
What to expect
The failed part replaced, the flush tested, and the base checked for leaks.

How a toilet repair call runs

From the first phone call to the final flush test, here's exactly what happens when you book us.

  1. Phone diagnosis

    We ask what the toilet is doing: running, rocking, backing up, or leaking at the base. That tells us what parts to load and whether to bring a drain snake or sewer camera. Most calls get a visit time agreed on the call, and emergency calls get priority.

    • Phone questions
    • Part check
    • Visit time
    Plumber repairing a running toilet in a Mount Pleasant, TX bathroom
  2. On-site inspection

    The tech shuts off the supply, drains the tank, and checks the fill valve, flapper, and flush valve. We rock the bowl to test the flange, look for water staining at the base, and check the shutoff valve. This tells us exactly what the repair needs.

    • Shutoff
    • Tank drain
    • Flange check
    Plumber repairing a running toilet in a Mount Pleasant, TX bathroom
  3. Repair and parts swap

    We replace what's worn: flapper, fill valve, wax ring, supply line, or closet bolts. If the clog is downstream, we run a drain snake or hand auger through the trapway and into the branch line. Parts are name-brand and matched to your toilet.

    • Parts swap
    • Clog clear
    • Seal set
    Plumber repairing a running toilet in a Mount Pleasant, TX bathroom
  4. Flush and leak test

    We run three full flush cycles and watch the tank refill, the bowl level, and the base for moisture. The tech checks the supply connection with a dry rag and confirms the shutoff valve holds. Nothing gets packed up until the floor stays dry.

    • Flush cycles
    • Dry check
    • Valve test
    Plumber repairing a running toilet in a Mount Pleasant, TX bathroom
  5. Cleanup and walkthrough

    We wipe down the tank, bowl, and floor, haul off the old parts, and walk you through what failed and why. You get a plain explanation of what to watch for and how to keep the same problem from coming back.

    • Wipe down
    • Haul away
    • Walkthrough
    Plumber repairing a running toilet in a Mount Pleasant, TX bathroom

Tools and methods we use

Move across a circle, or focus it and press Enter, for an illustrative thermal view of this toilet repair photograph.

  • Plumber repairing a running toilet in a Mount Pleasant, TX bathroom

    Closet auger

    Clears clogs in the trapway without scratching the porcelain. It's the first tool we reach for on a backed-up toilet.

  • Plumber cleaning a clogged drain in a Mount Pleasant, TX home

    Drain snake

    Reaches clogs past the trap and into the branch line. We use it when a plunger and auger don't clear the blockage.

  • Plumber running a sewer camera inspection in Mount Pleasant, TX

    Sewer camera

    Confirms whether a repeat clog is caused by root intrusion, a collapsed pipe, or a belly in the line before we recommend a repair.

  • Plumber soldering a copper pipe joint under a kitchen sink in a Mount Pleasant, TX home

    Pipe wrench and adjustable wrench

    Used on supply lines, shutoff valves, and tank bolts. A proper wrench prevents overtightening and cracked porcelain.

  • Plumber using leak detection equipment in a Mount Pleasant, TX home

    Leak detection microphone

    Finds hidden leaks behind walls or under floors when a toilet leak isn't obvious at the base.

Thermal views are illustrative, generated from photographs of toilet repair work in Mount Pleasant, TX.

Methods

  • Pressure gauge

    Checks water pressure at the fixture. High pressure wears out fill valves and supply lines faster than normal.

  • Push-to-connect fittings

    Used for quick, reliable supply line repairs when a shutoff valve or line needs replacing without soldering.

  • 2024 International Plumbing Code adopted by the City of Mount Pleasant (Ordinance 2026-2, effective 20 January 2026)

    We set wax rings, flanges, and supply connections to code so the repair holds up to inspection and doesn't create a liability down the road.

  • WaterSense-rated parts

    When we replace a fill valve or flapper, we use WaterSense-rated parts that match the fixture's flush volume. That keeps water use where it should be and avoids short-cycling.

  • Three-flush leak test

    Every repair ends with three full flush cycles and a dry-rag check at the base and supply line. If there's a slow weep, we find it before we leave.

  • Camera-first diagnosis on repeat clogs

    If a toilet backs up more than once in a few months, we run a sewer camera before recommending a repair. That prevents us from clearing the same clog a third time.

When to call for toilet repair

Plumber repairing a running toilet in a Mount Pleasant, TX bathroom

Running all night

We replace the flapper and fill valve, clean the valve seat, and set the tank level.

Outcome: Silence, and a bill back to normal next cycle.

Plumber repairing a running toilet in a Mount Pleasant, TX bathroom

Rocking bowl

The toilet rocks when you sit down and the floor is damp at the base.

The flange was cracked and the wax ring had failed. We replaced the flange and ring and re-seated the bowl.

Outcome: A solid bowl and a dry floor.

Plumber repairing a running toilet in a Mount Pleasant, TX bathroom

Weak flush

The toilet flushes weakly and needs two flushes every time.

The rim jets were scaled shut and the flapper was closing too fast. We cleared the jets and fitted a flapper matched to the tank.

Outcome: One flush, every time.

Plumber repairing a running toilet in a Mount Pleasant, TX bathroom

Rental turnover

A rental toilet runs and the new tenant has already called.

We coordinated access with the property manager, replaced the fill valve and flapper, and checked the shutoff while we were there.

Outcome: A quiet toilet ready for move-in day.

Plumber repairing a running toilet in a Mount Pleasant, TX bathroom

Leak at the base

Water appears at the base of the toilet after every flush.

The wax ring had dried out. We pulled the toilet, fitted a new ring, and checked the flange before re-seating it.

Outcome: A dry floor and a flush that stays where it belongs.

Plumber repairing a running toilet in a Mount Pleasant, TX bathroom
DowntownSouthgateNorthwood

How toilet repair runs in Mount Pleasant, TX

Running toilets are the number-one toilet call in town, and they skew old: Downtown homes from the 1940s–1980s and Southgate's 1970s ranches still run their original internals. In newer Northwood and Stone Briar homes the fault is usually a single flapper or a fill valve that sticks.

Rocking toilets are the second call, and they follow the clay: East Texas clay moves with wet and dry cycles, and a slab that shifts a fraction leaves a toilet rocking on its flange. If your toilet runs constantly, our post on why a toilet runs constantly and how to stop it walks through the checks — and when to call us.

  • Downtown Mount Pleasant, TX: Early-to-mid-20th-century homes where toilet internals are often original. Running toilets and worn flappers are the usual repair.
  • Southgate: 1970s brick ranches with aging fixtures. Fill valves that will not shut off and weak flushes are common here.
  • Northwood and Stone Briar: Newer north-side subdivisions, where toilet repair work is usually on newer systems. The fault is usually one flapper or a sticking fill valve, fixed while we are there.
  • Lake Bob Sandlin area: Lakefront homes where a running toilet can run for weeks between stays. We check the shutoff and supply line at the same visit.
  • Rocking toilets and clay soil: East Texas clay moves with wet and dry cycles. A rocking toilet needs the flange checked, not just a new wax ring.
  • Rentals and turnovers: A running toilet is the first complaint a new tenant makes. We repair toilets between tenancies and check the base for leaks.
See where we work
  • We walk the bathroom and ask what the toilet is doing.
  • We lay a drop cloth and shut off the supply line.
  • We test the flush, check for leaks, and explain next steps.

From problem to finished result

Example — a typical call. The stories below are illustrative examples of the kind of toilet repair calls we take, not a record of a specific past job.

Plumber repairing a running toilet in a Mount Pleasant, TX bathroom
IllustrativeThe thermal view for this toilet repair job is generated from the photograph. It is not a measurement. Drag the handle to compare the before and after on this toilet repair job, or use the arrow keys once it is focused.
  • Running toilet in a 1980s home

    Before: The flapper was warped and the fill valve was scaled up from hard water. The tank never shut off completely.

    After: We replaced the flapper and fill valve, cleaned the valve seat, and set the tank level to the correct mark. Three flush cycles confirmed the refill stopped each time.

    Check the flapper every six months for warping or scale. A water softener reduces the mineral buildup that wears out these parts.

  • Leak at the base in an older home

    Before: A customer in Downtown Mount Pleasant, TX noticed water seeping from under the toilet after every flush. The wax ring had failed and the closet flange was cracked. The subfloor was damp but not yet rotted.

    After: We pulled the toilet, installed a repair ring on the flange, set a new wax ring, and reset the fixture with new closet bolts. A full flush test showed no moisture at the base. The floor stayed dry.

    Avoid rocking the toilet when you sit, and check the base for moisture once a season. A loose toilet breaks the wax seal fast.

  • Repeat clog in a rental unit

    Before: A property manager in the US 271 retail corridor had the same toilet backing up every few weeks. Plunging cleared it temporarily, but the clog kept returning. The branch line was partially blocked.

    After: We ran a drain snake through the branch line and pulled out a buildup of paper and scale. A follow-up camera check confirmed the line was clear.

    Use single-ply paper and avoid flushing wipes. If the same toilet clogs twice in a season, get the line camera-checked before it backs up again.

Common toilet problems we fix in Mount Pleasant

Most of the calls we get fall into a handful of categories. Here's what we see and how we handle it.

  • Constant runningToilet runs constantly and won't shut offIt also wears out the fill valve faster. We replace the flapper and adjust or replace the fill valve. In hard-water areas, we clean the valve seat so the new flapper seals properly.
  • Water at baseWater pooling at the base of the toiletA leak at the base usually means a failed wax ring or a cracked closet flange. Left alone, water reaches the subfloor and can rot it out within a season. We pull the toilet, inspect the flange, and replace the wax ring. If the flange is cracked, we install a repair ring. We test the seal with a full flush before setting the fixture back down.
  • Repeat backupsToilet backs up and plunging doesn't helpA clog past the trapway means the blockage is in the branch line or the sewer line. Repeated backups can signal root intrusion or a collapsed pipe. We run a drain snake through the branch line. If the clog returns, we run a sewer camera to check for root intrusion or pipe damage and recommend sewer line repair if needed.
  • Rocking fixtureToilet rocks or feels loose at the floorA rocking toilet breaks the wax seal, which leads to leaks and floor damage. It usually means a corroded closet bolt or a broken flange. We pull the fixture, inspect the flange, replace the closet bolts and wax ring, and shim the base so it sits level. Then we torque the bolts and test for leaks.
  • Weak flushWeak flush or bowl won't refillA weak flush leaves waste behind and can point to a clogged rim jet, a failing fill valve, or low water pressure from a corroded supply line. We clean the rim jet holes, check the fill valve and supply line, and test the water pressure. If the supply line is corroded, we replace it with a braided stainless line.

Why homeowners call us first

A proper repair stops the leak, lowers the water bill, and protects the floor.

  • Lower water bills

    A running toilet can waste a lot of water every day, which shows up fast on a Mount Pleasant utility bill. We replace the fill valve and flapper, set the tank level correctly, and confirm the refill stops.

  • No more floor damage

    A leaking toilet usually means water is already creeping under the vinyl or tile. We pull the toilet, inspect the flange, and set a new wax ring so the seal is dry. Catching it early saves subfloor replacement.

  • Parts on the truck

    We stock flappers, fill valves, wax rings, supply lines, and closet flange repair rings on the truck, so most repairs are finished while we are there instead of needing a diagnosis trip and a return trip.

  • Clear answers before we start

    We tell you what's wrong, what it takes to fix it, and what it costs before we turn a wrench. If the flange is cracked and the fixture is old, we lay out both options and let you choose.

What you receive with toilet repair

Clear records from your toilet repair job that you can keep and share.

Work summary

What was replaced and why

Part list

Parts used on the repair

Photo record

Photos of the flange and seal

Next steps

What to watch for later

Repair versus replace: what to know

Most toilets can be repaired. The decision comes down to fixture age, flange condition, and water use.

Repair

Fixing the worn part on a sound fixture

  • Under 15 years old
  • Crack-free bowl
  • Flange intact

Replace

Installing a new fixture when repair won't hold

  • Broken flange
  • Cracked tank
  • 3.5-gallon model

Upgrade

Moving to a high-efficiency fixture

  • 1.28 gallons per flush
  • WaterSense rated
  • Lower water use

Parts and materials we work with

  • Wax ring
  • Flapper
  • Fill valve
  • Supply line
  • Closet bolts
  • Shutoff valve
  • PEX tubing
  • PVC pipe

Service ZIP codes

A list like this tells people straight away whether we cover their street for toilet repair. Not listed? Call and ask — it only takes a minute.

  • 75455
  • 75456

Areas we serve in Mount Pleasant, TX

Based in Mount Pleasant and covering the places around it. Pick one for local details.

View all service areas

What neighbors say

Excellence service and diagnosis with courtesy and understanding of the whole issue. Went well beyond the norm to assist whereby I was able to resolve the problem. Especially considering it was a Saturday morning service call Thank you so much for your expert advice. Hot water again, yeah!!!

SamE Embras Jr
5 stars · 2 years ago · Google review

The service I received from NTP Plumbing in April was Absolutely EXCEPTIONAL! The technician/plumber name was Jeremy. He took care of my pipe issues efficiently and treated me like I was family. Jeremy had excellent customer service/interpersonal skills and he made sure the work done was in the spirit of excellence. I would be remiss if I didn't mention the wonderful service I received from the owner, James. He was so welcoming and genuinely kind. James was able to get me scheduled in so that my plumbing would be taken care of in a timely manner. Thank you NTP Plumbing for all you do and especially for the things I don't see.

Ozie Hollingsworth
5 stars · 2 years ago · Google review

I recently used NTP for a clogged kitchen drain. The job took longer than anticipated but James honored his quote and the work is guaranteed for 30 days. I would highly recommend NTP for any plumbing needs you may have.

No Name
5 stars · 2 years ago · Google review

This review is about a used-appliance sale, a separate line of business — not plumbing work.

They sell used appliances as well, fyi they r super nice ND very great prices! They delivered my fridge same day we're quick and nice. Thank y'all so much for being so efficient!!

Brittney Moss
5 stars · 2 years ago · Google review

They were very professional and courtious. Fixed all my plumbing problems

Tim Griffin
5 stars · 4 years ago · Google review

4.8 out of 5 from 16 Google reviews — 15 five-star and 1 one-star. Read all reviews for NTP Plumbing on Google.

All reviews
4.8 out of 5 · 16 Google reviews

Questions we hear on the phone

Usually a flapper that no longer seals, so the tank drains into the bowl and the fill valve keeps topping it up. A worn fill valve can do the same. We find which part has failed and replace it — the fix is usually finished while we are there.

Yes. A rocking toilet usually means the flange is damaged or the floor has moved — common where East Texas clay shifts. We check the flange and the floor, not just the wax ring, so the leak does not come back.

Yes. A toilet that runs all day can waste a lot of water every day — it is one of the biggest hidden water users in a house, and it shows up on the bill within a cycle.

No — state law exempts water-closet replacement and the small repairs around it from the permit requirement. Larger plumbing work in the city follows the 2024 International Plumbing Code (Ordinance 2026-2, effective 20 January 2026).

Need toilet repair in Mount Pleasant, TX today?

Call (903) 350-9085 and tell us what the toilet is doing. We will fix the failed part and check the base for leaks. Open 24 hours, Monday–Sunday.

Get in Touch with NTP Plumbing

Call (903) 350-9085 any time — NTP Plumbing is open 24 hours, Monday–Sunday. Tell us what you are seeing and we will talk you through shutting the water off if you need to. We serve Mount Pleasant, TX, including ZIP codes 75455 and 75456.

Thanks. Your request is in and the team will follow up shortly.